6.11.2025
Question
Question:
Can I find out the factory calibration and permissible diameters for the FP-ELS-L level sensor?
Answer:
The minimum diameter of the sensor fitting is 20.5 mm. Calibration levels: Alarm - -3.5 mm down from the centerline; normal - +3.5 mm up from the centerline. Actual activation levels may vary, as the float depth depends on the freon (oil) density, which varies depending on the brand and the current temperature.
Can I find out the factory calibration and permissible diameters for the FP-ELS-L level sensor?
Answer:
The minimum diameter of the sensor fitting is 20.5 mm. Calibration levels: Alarm - -3.5 mm down from the centerline; normal - +3.5 mm up from the centerline. Actual activation levels may vary, as the float depth depends on the freon (oil) density, which varies depending on the brand and the current temperature.
Answer
Question:
Can I find out the factory calibration and permissible diameters for the FP-ELS-L level sensor?
Answer:
The minimum diameter of the sensor fitting is 20.5 mm. Calibration levels: Alarm - -3.5 mm down from the centerline; normal - +3.5 mm up from the centerline. Actual activation levels may vary, as the float depth depends on the freon (oil) density, which varies depending on the brand and the current temperature.
Can I find out the factory calibration and permissible diameters for the FP-ELS-L level sensor?
Answer:
The minimum diameter of the sensor fitting is 20.5 mm. Calibration levels: Alarm - -3.5 mm down from the centerline; normal - +3.5 mm up from the centerline. Actual activation levels may vary, as the float depth depends on the freon (oil) density, which varies depending on the brand and the current temperature.
There are no comments